spot_img
Tuesday, June 28, 2022
More
    spot_img
    HomeGadgetsHow to Install an Air Duct Odor Eliminator?

    How to Install an Air Duct Odor Eliminator?

    -

    While HVAC systems are a blessing in intense winters and summer months, they can be a nuisance if they are unclean. Did you know your HVAC system can be a significant source of contaminated air and musty odor and can risk your health? If yes, then you should focus on keeping your ducts clean. For this, there are several DIY methods. The article will highlight how to install an air duct odor eliminator so that you can enjoy fresh-smelling air.

    If you sense a musty smell coming from your ductwork, it can be due to several reasons. However, the most common cause is mold development in your system. In this case, you should immediately seek the help of HVAC Cleaning Roswell.

    What is the Solution?

    One of the great solutions to eliminate foul odors from your Heating and Cooling unit is air duct odor eliminator. It is also known as the HVAC Odor Block. It is not a scented mask or cover-up. It is a unique formula that molecularly reacts with aerial compounds that cause odors and eradicates it along with other indoor contaminants so that you can breathe in clean, germ-free, and clean air.

    So, the trend of HVAC Odor Block is increasing day by day, as it not only helps eliminate odors from the HVAC system but also enhances the indoor air quality of your surroundings.

    Mold or mildew, bacterial growth, pets, smoking, water seepage, fire damage, chemicals or paints, pest infestation, garbage, sewage gasses, and brutes are some leading causes of foul odors. 

    You can use this HVAC Odor neutralizer in your AC systems, furnaces, fan coil units, and air handlers. Residential HVAC odor eliminator can handle a system of up to 3 tons for a sixty days period. At the same time, a commercial HVAC odor diffuser can manage a 10 – 15 tons’ system for 120 days.

    Will the Odor Diffusers Work?

    You know that clean and sanitized ducts are crucial to maintaining high indoor air quality. If your HVAC system has filthy ductwork, you might be exposed to Volatile Organic Compounds (VOC) (that your system may emit). Hence, you are at risk of allergies and other health issues. So, the ideal way to treat this problem is to use unique odor eliminator or diffusers.

    So, what is this? As per the name, these elements help eradicate any unpleasant odors that it gets in contact with. Typically, there are two forms of eliminators. One type masks the odor by emitting a more pungent smell into the air. It is the most basic approach to odor regulation in closed spaces. However, it is not ideal in resolving the more critical problem of removing potentially hazardous compounds within your ducts.

    While the second type is a specialized one that helps neutralize the compounds that cause the unpleasant smell. Therefore, these are personalized to a particular cause or application. The odor of the molecules is due to their distinct composition. And odor neutralizers function by breaking down the particles of target compounds into tinier forms that don’t eliminate the smell.

    Odour Neutralizers for Ductwork

    As your HVAC system functions, condensation may occur, damping many internal surfaces. So, it may trigger the development of mold, mildew, and VOCs within your HVAC ductwork.

    Also, floods are quite common and can speed up mold growth, leaving a noticeable odor if you don’t treat it. So, you need the right solution that suits your HVAC unit explicitly. Therefore, experts have designed unique odor eliminators that best match your ductwork needs.

    These products can quickly diffuse into several parts of your Heating and Cooling unit like coil, ducts, and fan motor and eradicate the primary indoor pollutants. Also, these products work by breaking down the contaminant compounds and acting as odor neutralizers. Besides, they comprise certain chemicals with a powerful odor that will mask any leftovers of the target compounds.  

    How to Install?

    Residential Odor-Neutralizer

    If you are looking to install a residential odor neutralizer, then you should follow these instructions:

    • Cautiously open the top of the box, and take off the plastic-wrapped equipment from the box.
    • Place the bare equipment back into the box.
    • Then, secure or position the box on or close to the air filter, within the blower section, or any other reachable place in the return ductwork system. It is a special vented box that lets the odor-neutralizer gradually evaporate into the HVAC unit. Hence, it can treat the entire air of the surroundings. For swiffer treatment or intense odors, you can leave the top side of the box open or agape.

    Hence, when the equipment is entirely shrunk or dried, it is best to substitute it with a new one. (it usually lasts for two months)

    Commercial Odor-Neutralizer

    • Cautiously take off the top of the label to uncover the vent openings.
    • Position the odor-neutralizer box in the air handler or other accessible place within the return ductwork system. It will allow the odor diffuser to gradually vaporize into the HVAC unit and treat the air of the entire building.
    • So, when the odor-neutralizer is entirely shrunk or dried, it is best to substitute it with a new one. (it usually lasts for four months)

    How to Install Ductwork Filter Pads?

    If the smell does not emerge from the AC unit, it may rise from any other part of the ductwork system. So, it might be impossible to identify the cause without twisting the camera system. Another great solution to eradicate unpleasant smells from your ductwork are duct filter pads. These are special hypoallergenic filters that you can quickly get from any home improvement store. It can suitably fit on vertical and horizontal ducts of all sizes.

    • Unscrew the duct vent covers and position the filter pads into the grate.
    • Screw the cover back on, and allow the filter to pull the contaminants.

    So, it’s simple, and you can do it by yourself. However, if you call an HVAC cleaning service, you may also access Dryer Vent Cleaning Roswell, GASo, you can quickly get all your house maintenance work done.

    How to Use Baking Soda to Remove Ductwork Odors?

    If you can’t find any of these components and you are looking for immediate relief from unpleasant smells, you can use a baking soda for the purpose. You need to place a tiny amount of soda in a dish and lather it on the smelly region of the HVAC unit.

    Also Read: Benefits of Tubed Packaged Goods

    Related articles

    LEAVE A REPLY

    Please enter your comment!
    Please enter your name here

    Stay Connected

    22,878FansLike
    0FollowersFollow
    3,371FollowersFollow
    0SubscribersSubscribe
    spot_img

    Latest posts

    Globe News USA